Machine Start-up and Shutdown
Every machine is started and stopped in the same order by a named operator, with the checks the maker’s manual lists. This SOP sets that order so that no step is skipped when production is under pressure.
At a glance
Nine Steps, in Order
1.Name the operator
2.Look around the machine
3.Read the handover note
4.Follow the maker’s start-up order
5.Run a test cycle
6.Stop and report if something looks wrong
7.Shut down in the set order
8.Clean and secure
9.Write the note for the next shift
The SOP in 2 minutes
Video goes here once it is uploaded to YouTube.
Where This Can Break
These are the points where a busy plant can slip. The PDF gives a simple fix for each.
The Full SOP to Print and Use
The PDF has the steps in full, the 10-point checklist, a fix for each break point and a 3-day plan to bring the SOP into use.
What a Written SOP Cannot Do by Itself
This SOP works on the day it is introduced. Three months later, a new operator has joined and learned the start-up order from whoever was free. Teams change over time, so a written SOP needs three things it cannot do by itself.
- A 2-minute training video of the start-up steps, in the language staff speak, so every new joiner learns the same way on day one.
- A local-language version of the checklist.
- A weekly 5-minute check that someone actually owns.
If your plant starts and stops machines differently from this one, a 2-minute WhatsApp voice note on how it works today is enough. A written SOP in this same format comes back within 48 hours, at no cost.
WhatsApp: +91 98101 41173 (India) | +250 799 524 457 (Rwanda)
Questions People Ask
Who owns this SOP?
Production manager or maintenance head. It is done by machine operators and line supervisors.
Does this replace our own rules?
No. The safety rules come from the maker’s manual and your own plant procedures. This SOP only sets the order. Have your production manager review it before you adopt it.
More Free Manufacturing SOPs
Free Manufacturing SOP 04 by Visionhunt. Free to use, copy and adapt. This is a general template for the process prepared by a communication and training company and not by a safety or engineering authority. The safety rules come from the maker’s manual and your own plant procedures. Have your production manager review it before you adopt it.